All American Firearms & Training
All American Firearms, located at 4863C Milgen Rd in Columbus GA offers gunsmithing services (refinishing, customization and repairs) and firearms skills training. We have NRA Certified instructors on staff and we are a licensed FFL (Federal Firearms License) holder for the purpose of doing gunsmithing work, firearms repair, customization, accurizing and Duracoat refinishing. We have a Certified Master Gunsmith on staff. Bring your gun by our shop for a detail clean and inspection, or tell us what you would like done with it to make it into your own "Custom" gun. We often get guns in that are old and beat up and need to be "brought back to life," and we love making your antique inherited gun look and work like new again. We can handle anything from something as simple as a custom trigger job or new sights to full refinishing and/or custom-fitted match-grade parts to improve accuracy. We are set up to re-plate nickel finished guns.

PHONE: 706-221-8863
twitter: aafirearmstng
pinterest: aafirearms
Testimonials speak for themselves:

"My 1911 is running great now."

"Wow, I can't believe you got that gun to work again, it's over 100 years old!"

"Thanks for installing sights on my Springfield XD."

"OMG, that is exactly what color I was looking for! Thank you for making my gun more "Girly."

4863C Milgen Rd, Columbus GA
Mon - Fri: 10:00 TO 6:00 PM
Saturday: 10:00 TO 2:00 PM
Sunday: Closed

Certified, qualified and experienced Master Gunsmith on staff. We handle all kinds of repair, refinishing and machine work (we have a full machine shop; lathe, mill, welder, etc). We are located at 4863C Milgen Rd, across the street from PAWS & Animal Control. This is just down the road from Shooters of Columbus, and is near Cooper Creek Park (if you were coming out of Cooper Creek Park, you would turn right, and we are 1/2 mile down the road on the left). We will stay open late or open early if you need to drop off or pick up a gun!
Prices are typical for "most models." All work requires a quote and we cannot give an accurate quote until we see the gun. Also, this is just a sampling of what we offer. The full list would be way too long and detailed to put on the web site (and we also might not want the competition to know what we charge). If you do not see what you want, call and ask. We will buy old, unwanted or broken guns - ask us.

Drill and tap for mounting Weaver or Picatinny rails about $130 depending on type of gun

Trigger Job (no parts, just polishing and adjustments) $130

Glock Trigger Job (full polishing of internals, plus Ghost connector) $95

Repair work (price per hour of labor) $75

Install Apex Trigger Kit $75

Minor repair work $50 (installation of parts requiring little to no fitting, etc)

Cut and re-crown rifle barrel $150

Thread rifle barrel $150

Glass bed rifle action $150 (includes labor and all materials)

Machine work (welding, RMR cuts, slide serrations, BoMar cuts, dovetails, etc) starts at $150

Pin and Weld flash hider $75

1911 Improvement Packages $225 to $450 (price varies with options such as new Wilson Combat springs, match grade hammer & sear, match grade hand-fitted barrel and bushing, compensator, sights, serrations, etc). WE FIT BULL BARRELS.

Written Firearms Value Appraisal $55 for up to 3 guns (add $5 per gun for more than 3)

Transfers (up to 3 guns at once) $30 per transfer / per NICS check

Clean Gun (Handgun) $30 per gun

Clean Gun (Long Guns) starting at $50 per gun (price may vary for some models)

Remove / Replace/Install sights - $20 to $65 depends on the model

Install scope (you bring all parts, includes mounting leveling & boresighting) $75

100 yard Boresight (rifles, with or without scope) $50

Remove broken/stuck fired case from chamber $75

Remove stuck live ammunition from chamber $75 and up depending on the situation

Re-blue firearm (Pistol - cold blue) starting at $150

Nickel plating $150 + depending on condition of item

Re-blue long gun (Rifle / Shotgun) starting at $150, price depends on model

Duracoat or Cerakote (Single Color, pistol, frame and slide) $150

Duracoat or Cerakote (per piece price for stripped items requiring no disassembly) $60

Duracoat or Cerakote (Long Gun, AR style, single color) starts at $225

For multiple colors, add $60 per additional color (i.e. slide and frame different colors)

Hydrographics (dipping) $190 for pistols, $225 and up for long guns

Stock refinishing $150 and up, depending on condition of wood and desired finish

We have the capability to create custom Cerakote / Duracoat patterns from almost any image, price for custom patterns is quoted by the job.

1-on-1 Lessons/Coaching $55.00 per hour (up to 2 students) - call or email to make an appointment

ALL JOBS are quoted when we see the gun. We cannot give a quote on repairs or any other work until we physically see the gun. We cannot give accurate estimates over the phone.